Difficulty setting up new or connecting to existing home network

N

network dave :(

Joined
Jan 23, 2016
Messages
1
Reaction score
0
I had a home network setup on my router and was connected to it via LAN on my old Win7 desktop. I purchased a new Win10 PC and set it up. On the Win10 PC I can connect to the internet but can't see the old network. My current connection is the (apparently?) default network 2. When I try and setup a new network in the Network and Sharing Center my router never populates. It does however show up in the device manager under connected devices.

Troubleshoot Problems yields no results. I've tried shutting off the wifi and connecting as well as disconnecting the router from the cable modem. Also flushed the DNS, refreshed ip, etc. All of my other wired and wireless devices still connect to this network.

The router is a netgear wnr2000v3. All firmware, including the realtek card, is up to date according to Windows.

Any thoughts/advice would be greatly appreciated.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Settings closes quickly 4
Setting up pin number instead of password 3
Win10 - cannot save display settings 0
Server Busy, This action cannot be completed because the settings program.... 1
F9 Opens Settings 1
Setting Tabs on Word 0
Cannot Open or View ANY disk drives or change settings in Explorer! 0
Difficulty updating Windows 10 on multiple PCs 2

Top