Installation stuck on "Wait a Minute" With Spinning Icon


Joined
Nov 1, 2020
Messages
17
Reaction score
2
I have installed a new m.2 drive in an HP Pavilion 14. All was going well until the restart and now it's stuck on "Wait a Minute" With a Spinning Icon.
The laptop has had beer spilled on it so I'm guessing this is responsible. The laptop continued to work for a week or so until the drive wasn't recognised anymore and appears to be dead when I tested it elsewhere.

Any suggestions or am I going to have to get the MB tested?
 
Ad

Advertisements

Joined
Nov 1, 2020
Messages
17
Reaction score
2
It has just failed completely. No power at all. I've tried removing the new M.2 Drive, the RAM, the Wireless card and the Battery one at a time but no luck.
Pretty sure it was the liquid spill that has taken a while to work into a component even though it has long since dried out at least visibly.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top