SOLVED Raid 1 setup


Joined
Dec 4, 2016
Messages
2
Reaction score
1
Hello all

I have a older MB (ASUS Rampage II Extreme) to be exact. I just put in two 5TB Hard drives to put into a Raid 1 array. I have them setup in the bios already as RAID and not AHCI. I also have two SSD drives that are not part of the array, one for Linux and one for Windows 10x64. When i boot into windows 10 they are two separate disks. I put them into a software raid last night in windows 10 but that just doesn't make sense since i setup them up manually in the bios. I tried to update the chipset but that fails. The current version i have is 10.0.14393, lateset is 10.1.1.14. Also for the Raid Controller i am using version 13.2.0.1022. Any help on this would be helpful.
 
Ad

Advertisements

Joined
Dec 4, 2016
Messages
2
Reaction score
1
This post is solved. Turns out it was a driver issue. I needed to install the mothberboard's raid driver version.
 
Ad

Advertisements

Trouble

Noob Whisperer
Moderator
Joined
Nov 19, 2013
Messages
12,699
Reaction score
2,083
Thanks for providing the follow-up information.
Glad to hear that you managed to resolve your issue.
Much appreciated.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top